The FLIR AX8 thermal monitoring camera watches critical equipment on your vessel, including engines, exhaust manifolds, and shaft bearings, to spot problems before you're stranded on the water.
The AX8 integrates with Raymarine multifunction displays (MFDs) and sends audible and visual alerts when the temperature of machine parts rise above preset thresholds.
Featuring FLIR’s MSX® imaging, which blends imagery from visible and thermal cameras, the FLIR AX8's detailed imagery is easier to understand.
FLIR's Exclusive Multi-Spectral Dynamic Imaging (MSX®) creates thermal imaging that is easier to understand.
Program specific areas to generate automated spot alarms when temperatures exceed pre-set thresholds.
View thermal, visible, and MSX video imagery on Raymarine MFDs.
|Dimensions (cooling plate)||
Width: 60 mm (2.36 in), Height: 125 mm (4.33 in), Depth: 14 mm (0.55 in)
Width: 55 mm (2.17 in), Height: 80 mm (3.15 in), Height (incl connectors): 93.5 mm (3.68 in), Depth: 25.6 mm (1.00 in)
Thermal, Visual, MSX® (Multi Spectral Dynamic Imaging)
80 x 60 pixels
|Visible light optical sensor resolution||
640 x 480 pixels
|Field of View (FoV)||
48° x 37°
|Measurement temperature range||
-10°C to 150°C (14°F to 302°F) ±2°C (±3.6°F)
10 Lux (without LED illuminated)
|Video (Image streaming)|
Stream format MPEG-4 ISO/IEC 14496-2, Simple profile 2
Stream format H.264 Baseline profile level 2.0
|Motion JPEG stream||
MJPEG Baseline Process Encoder, Baseline ISO/IEC 10918-1 JPEG compliance
Power and general purpose digital I/O (Type: M12 8-pin A-coded)
1 x 10/100 Mbits/s ethernet (Type: M12 8-pin X-coded)
|Power over Ethernet||
PoE IEEE 802.3af Class 2 device (6.49 W Max)
2 W continuous / 4.7 W Max
|Nominal supply voltage||
12 / 24 V dc
|Operating voltage range||
10.8 V dc to 30 V dc
-30 °C to +70 °C (-22 °F to 158 °F)
0°C to 55°C (32°F to 131°F) (with cooling bracket attached)
AX8 thermal camera
T6 Torx driver
1 x 1/4" - 20 x 30 mm Hex bolt (required for fitting cooling bracket to the optional mounting bracket: R70375)
4 x No.6 x 25 mm screws (required for surface mounting cooling bracket / camera assembly)
4 x PT 22x8 T6 torx screws (required for fitting cooling bracket to camera)
4 x 10-32UNF 1/2" hex bolts (required for fitting cooling bracket to the optional RAM mount 261-2288-00)
5 m (16.4 ft) Ethernet cable (M12 X—coded to RJ45) (required for connecting camera to PoE injector)
3 m (9.84 ft) RayNet to RJ45 adaptor cable (required for connecting PoE injector to Raymarine MFD or network switch)
The information contained in this page pertains to products that may be subject to the International Traffic in Arms Regulations (ITAR) (22 C.F.R. Sections 120-130) or the Export Administration Regulations (EAR) (15 C.F.R. Sections 730-774) depending upon specifications for the final product; jurisdiction and classification will be provided upon request.